Operating Instructions; Sharpening The Chain - Oregon 530-120H Original Instruction Manual

OPERATING INSTRUCTIONS

OPERATING INSTRUCTIONS

SHARPENING THE CHAIN

– Wear personal protection equipment
– Sharpen all the cutters on the same side and then adjust the vise as explained in
the previous sections, and sharpen the cutters on the opposite side
– When grinding is complete, ensure all cutter top plates equal length
A
Make sure the vise handle (15) has been pulled
to the right and the vise jaws (16) are tight,
and the cutter is blocked (12) properly
28
A=B
B
Start the grinder by turning the
switch to position "l"
Sharpen the cutter by lowering the
grinding wheel with handle (E)
520-120 / 530-120H