13
WHEELS, TIRES
13.3
Removing the rear wheel
–
Clean and grease wheel spindle
Long-life grease (
–
Position the front wheel.
The brake linings are correctly positioned.
–
Insert the wheel spindle.
–
Tighten screws
Guideline
V00247-10
Screw, fork stub
–
Mount and tighten screw
Guideline
Screw, front wheel spindle
–
Remove the motorcycle from the lift stand. (
V00219-11
–
Operate the hand brake lever several times until the brake linings are seated cor-
rectly against the brake disc.
–
Loosen screws
–
Operate the front brake and compress the fork a few times firmly.
The fork legs straighten.
–
Tighten screws
Guideline
Screw, fork stub
V00248-10
Preparatory work
–
Raise the motorcycle with a lift stand. (
Main work
–
Remove nut
–
Remove chain adjuster
H00116-10
–
Withdraw wheel spindle
ward.
–
Push the rear wheel forward as far as possible. Remove the chain from the rear
sprocket.
Info
Cover the components to protect them against damage.
Warning
H00117-10
Danger of accidents Damaged brake discs reduce the braking effect.
–
–
Holding the rear wheel, withdraw the wheel spindle. Take the rear wheel out of the
swingarm.
Info
Do not operate the foot brake lever when the rear wheel is removed.
2
.
p. 88)
3
.
4
.
M10
3
.
3
.
1
.
2
.
3
only enough to allow the rear wheel to be pushed for-
Always lay the wheel down in such a way that the brake disc is not dam-
aged.
M6
10 Nm (7.4 lbf ft)
Loctite
40 Nm
(29.5 lbf ft)
p. 31)
M6
10 Nm (7.4 lbf ft)
p. 31)
64
243™
®