Removing The Shock Absorber; Installing Shock Absorber; Removing The Seat; Mounting The Seat - KTM 65 SX 2018 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.18

Removing the shock absorber

11.19

Installing shock absorber

11.20

Removing the seat

11.21

Mounting the seat

Preparatory work
–
Raise the motorcycle with a lift stand. (
Main work
–
Remove screw
without blocking the rear wheel. Fix the rear wheel in this position.
–
Remove screw
absorber.
V00207-10
Main work
–
Push splash protector
tighten screw
Guideline
Screw, top shock absorber
–
Mount and tighten screw
Guideline
V00207-11
Screw, bottom shock
absorber
Finishing work
–
Remove the motorcycle from the lift stand. (
–
Open quick release
–
Pull back the seat and remove it.
H00122-10
–
Hook seat onto screw
The catch
V00208-10
1
and lower the rear wheel with the swingarm as far as possible
2
, push splash protector
1
to the side and position the shock absorber. Mount and
2
.
M10
3
.
M10
1
and raise the rear of the seat.
1
and lower the seat at the rear and push it forward.
2
hooks into the fuel tank.
p. 31)
3
to the side, and remove the shock
Loctite
45 Nm
(33.2 lbf ft)
45 Nm Loctite
(33.2 lbf ft)
p. 31)
39
243™
®
® 243™