KTM 65 SX 2018 Owner's Manual page 64

12 BRAKE SYSTEM
–
Mount and tighten screw
Guideline
Screw, rear brake lining
–
Mount lock washer
–
Check the brake discs. (
–
Operate the foot brake lever repeatedly until the brake linings are in contact with
the brake disc and there is a pressure point.
H00143-10
–
Add brake fluid up to level
Guideline
A
Level
voir rim)
Brake fluid DOT 4 / DOT 5.1 (
–
Position the membrane and the cover with the washer. Mount and tighten the
screws.
H00115-10
Info
Clean up overflowed or spilled brake fluid immediately with water.
2
.
1
.
p. 52)
A
.
(brake fluid level below reser-
p. 86)
M6 10 Nm (7.4 lbf ft)
10 mm (0.39 in)
62