Installation - urmet domus 1092/204A Instructions Manual

INSTALLATION

1. Make sure that no units are powered before starting the installation procedure.
2. Install the mini camera on the bracket and fasten it.
Important note:
The bracket must not be disconnected from the camera body

Do not rotate the camera body through 360 deg as this may damage the cable running inside the
joint.
3. Position the bracket to frame the required picture and fasten it to the wall or other flat surface.
4. Connect the video output to the utility.
5. Power the mini camera.
8
Max 170° Max 170°
Power wire
Cavo alimentazione
Ingresso video
Video input
Video output wire
Watch out for the hex screw: just loosen
it when adjusting the horizontal / vertical
position of the camera. Do not unscrew it
completely.
Max 35°
Power unit
Max 60°
DS1092-114A