Installation; Operating Features - urmet domus 1092/254H Quick Manual

ENGLISH

INSTALLATION

1 Make sure that no units are powered before starting the installation procedure.
2 Install the camera on the bracket and fasten it.
3 Position the bracket to frame the required picture and fasten it to the wall or other flat surface.
4 Connect the video output to the utility.
5 Power the camera.
6 Adjust the lens to frame the required images.

Remove the camera top.

Loosen the protective dome.

Turn towards WIDE "W" to move the subject away (the frame and angle become consequently
wider).

Turn towards TELE "T" to move the subject closer (the frame and angle become consequently
narrower).

Turn towards NEAR "N" to adjust focus of nearby subjects.

Turn towards FAR "∞" to adjust focus of faraway subjects.
Focus adjustment ring
VARIFOCAL adjustment ring

OPERATING FEATURES

MENU setting
DS1092-214A
Blind spot covered
by LEDs
Focus adjustment ring lock
pin
VARIFOCAL adjustment ring
lock pin
UP
LEFT SET
DOWN
RIGHT
5