Advertisement
HOW TO CONNECT YOUR VCR
Note: If your VCR has an unused AUDIO OUT jack,
see instruction
A below. If the AUDIO OUT jack is
being used, see instruction B. If you have a TV
with a built-in VCR, see instruction
B. If your VCR
is connected to your home stereo, see HOW TO
CONNECT YOUR HOME STEREO on page 14.
A. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the included adapter.
Plug the adapter into the AUDIO OUT jack on your
VCR.
A
i_"_"i
Audio
Adapter 4
i_[_]
i
Cable
A
B. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the included adapter.
Plug the adapter into an RCA adapter (available at
electronics stores). Next, remove the wire that is
currently ptugged into the AUDIO OUT jack on your
VCR and plug the wire into the unused side of the
RCA adapter. Plug the RCA adapter into the AUDIO
OUT jack on your VCR.
B
'y_ ........!
,
....
_
RCA Adapter_}
Zi[]
(0)
Audio
i@ _
Cable
Adapter
Wire removed from--}_:_J
AUDIO OUT jack
__,:_ _$$BS_'_
_£4_1"_::_'_ _'* _ :_+_
"_" 'i:_'_"b4_'1:*-_
:,'_ _;'_
egOeB,..,
: ::
.
.
To use iFIT.com CD's or videocassettes,
the treadmill
must be connected to your portable CD player, portable
stereo, home stereo, computer with CD player, or
VCR. See HOW TO CONNECT THE TREADMILL
TO
YOUR CD PLAYER, VCR, OR COMPUTER
on page
13. Note: To purchase iFIT,cem
CD's or to pur-
chase iFIT,com videocassettes,
call tog-free
1-800-
735-0768.
Follow the steps below to use an iFIT.com CD or
video. Note: The instructions
included
in the CD
case describe
how to use the CD with a variety
of
PROFORM treadmills.
Some instructions
may not
apply to this treadmill.
D
Insert the key fully into the console.
See HOW TO TURN ON THE POWER on page
10.
B
When the key is in-
serted, the manual
mode will be selected.
To use an iFIT.com CD
or video program, press
the PROGRAM button
repeatedly until the
iFIT.com indicator lights.
Press the PROGRAM button.
lgl
Insert the iFIT.com CD or videocassette.
If you are using an iFIT.com CD, insert the CD
into your CD player. If you are using an iFIT.com
videocassette,
insert the videocassette
into your
VCR.
B
Press the PLAY button on your CD player or
VCR.
A moment after the button is pressed, your personal
trainer will begin guiding you through your workout.
Simply follow your personal trainer's instructions.
Note: If the TIME display is flashing, press the
START button or the SPEED _. button on lhe con-
sole. The treadmill will not respond to a CD or
video program when the TIME display is flashing.
15
Advertisement
Need help?
Do you have a question about the 835QT and is the answer not in the manual?
Questions and answers
the reset switch is in the proper position but still no power
The Pro-Form 835QT may have no power despite the reset switch being in the proper position due to several possible reasons:
1. The power cord may not be plugged into a surge suppressor, or the surge suppressor may not be plugged into a properly grounded outlet.
2. The surge suppressor may not meet the required specifications (UL 1449 listed, 400V suppressed voltage rating, 450J minimum surge dissipation, 120V AC, 15A).
3. The treadmill may be plugged into a GFCI-equipped outlet, which is incompatible with the treadmill.
4. The key may not be fully inserted into the console.
5. The on/off switch near the power cord may not be in the "on" position.
6. The circuit breaker on the treadmill frame may have tripped and needs resetting.
Check these factors to restore power to the treadmill.
This answer is automatically generated