Advertisement
BEFORE YOU BEGIN
Thank you for selecting the revolutionary PROFORIVP
835QT treadmill. The 835QT treadmill combines ad-
vanced technology with innovative design to help you
get the most from your exercise program in the conve-
nience and privacy of your home. And when you're not
exercising, the unique 835QT can be folded up, requir-
ing less than half the floor space of other treadmills.
For your benefit, read this manual carefully before
using the treadmill, If you have addi_tionalquestions,
please call our toll-free HELPLINE at 1-800-736-6879,
Monday through Saturday, 7 a.m. until 7 p.m. Central
Time (excluding holidays). To help us assist you,
please note the product model number and sedal num-
ber before calling. The model number of the treadmill
is 831.299480. The serial number can be found on a
dec_ attached to the treadmill (see the front cover of
this manual for the location).
Before reading further, please review the drawing
below and familiarize yourself with the parts that are
labeled.
Water Bottle
Holder (Bottle
not included)
Pulse Sensor
Lock Knob,
LEFT SIDE
Walking Belt,
Foot F
Book Holder
Console
Handrail
RIGHT SIDE
On/Off Switch
Circuit
Breaker
Rear Roller
Adjustment Bolts
Powe" Cord
Front
Wheel
--
Cushioned Walking Platform
5
Advertisement
Need help?
Do you have a question about the 835QT and is the answer not in the manual?
Questions and answers
the reset switch is in the proper position but still no power
The Pro-Form 835QT may have no power despite the reset switch being in the proper position due to several possible reasons:
1. The power cord may not be plugged into a surge suppressor, or the surge suppressor may not be plugged into a properly grounded outlet.
2. The surge suppressor may not meet the required specifications (UL 1449 listed, 400V suppressed voltage rating, 450J minimum surge dissipation, 120V AC, 15A).
3. The treadmill may be plugged into a GFCI-equipped outlet, which is incompatible with the treadmill.
4. The key may not be fully inserted into the console.
5. The on/off switch near the power cord may not be in the "on" position.
6. The circuit breaker on the treadmill frame may have tripped and needs resetting.
Check these factors to restore power to the treadmill.
This answer is automatically generated