Advertisement
SEARS
Model No. 831.299480
QUESTIONS?
If you find that:
• you need help assembling
or
operating the PROFORM
835QT treadmill
• a part is missing
• or you need to schedule repair
service
call our toll-free HELPLINE
1-800-736-6879
Monday-Saturday,
7 am-7 pm
central Time (excluding holidays)
REPLACEMENT
PARTS
if parts become worn and need
to be replaced, call the following
toll-free number
1-800-FON-PART
(1-800-366-7278)
The model number and Serial number of your PROFORIvP 835QT
treadmill are listed on a decal attached to the frame. See the front
cover of this manual to find the location of the decal.
All replacement parts are available for immediate purchase or
special order when you visit your nearest SEARS Service Center.
To request service or to order parts by telephone, call the toll-free
numbers listed at the left.
When requesting help or service, or ordering parts, please be
prepared to provide the following information:
• The NAME OF THE PRODUCT (PROFORM"
835QT treadmill)
• The MODEL NUMBER OF THE PRODUCT (831.299480)
• The KEY NUMBER AND DESCRIPTION OF THE PART (see the
EXPLODED
DRAWING in the center of this manual and the
PART LIST on page 23).
FULL 90 DAY WARRANTY
For 90 days from the date of purchase, if failure occurs due to defect in material or workmanship in this
SEARS TREADMILL EXERCISER, contact the nearest SEARS Service Center throughout the United
States and SEARS will repair or replace the TREADMILL EXERCISER, free of charge.
This warranty does not apply when the TREADMILL EXERCISER is used commercially or for rental pur-
pOSeS.
This warranty gives you specific legal rights, and you may also have other rights which vary from state
to state.
SEARS, ROEBUCK AND CO., DEPT. 817WA, HOFFMAN ESTATES, IL 60179
Part No. 166432 R0800A
Printed in USA © 2000 Sears, Roebuck and Co.
Advertisement
Need help?
Do you have a question about the 835QT and is the answer not in the manual?
Questions and answers
the reset switch is in the proper position but still no power
The Pro-Form 835QT may have no power despite the reset switch being in the proper position due to several possible reasons:
1. The power cord may not be plugged into a surge suppressor, or the surge suppressor may not be plugged into a properly grounded outlet.
2. The surge suppressor may not meet the required specifications (UL 1449 listed, 400V suppressed voltage rating, 450J minimum surge dissipation, 120V AC, 15A).
3. The treadmill may be plugged into a GFCI-equipped outlet, which is incompatible with the treadmill.
4. The key may not be fully inserted into the console.
5. The on/off switch near the power cord may not be in the "on" position.
6. The circuit breaker on the treadmill frame may have tripped and needs resetting.
Check these factors to restore power to the treadmill.
This answer is automatically generated