Advertisement
IMPORTANT
PRECAUTIONS
lZ:
Unplug
:i
aloft switch to
hen tile treadmill
is not in
use. (Sea the draw ng on page 5 for the oea-
tion of the on/off switch.)
I0. When connecting
the power cord (see page 8),
plug the power cord into a surge suppressor
18 Do not attempt to raise, lower, or move the
(not included)
and plug the sui'ge suppressor
treadmill
unt
t s proper y assembled
(See
into a gr0unded
c_rcuit capable of car:rying 15
ASSEMBLY
on page 6, and HOW TO
FoLD
or more amps. No other appliance
should be
AND MOVE THE TREADMILL
on page 19.) You
on the salne'circuit.
Donot
use _n e>(tensi0n
must be able to safely lift 4S pounds
(20 kg) in
cord.:
order to ra se,, ower, Or move the treadmill.
11.Useonlyasnge-outetsurgesuppressorthat
19 Do not change the nc neofthetreadm
by
is UL 14_19listed as a transient
Voffage surge
plac ng objects
under the treadmill.
suppressor
(TVSS),The
surge s(ippresso_
......
: •
" • •
.
wearing
only stockings,
or in sandals.
3
Advertisement
Need help?
Do you have a question about the 835QT and is the answer not in the manual?
Questions and answers
the reset switch is in the proper position but still no power
The Pro-Form 835QT may have no power despite the reset switch being in the proper position due to several possible reasons:
1. The power cord may not be plugged into a surge suppressor, or the surge suppressor may not be plugged into a properly grounded outlet.
2. The surge suppressor may not meet the required specifications (UL 1449 listed, 400V suppressed voltage rating, 450J minimum surge dissipation, 120V AC, 15A).
3. The treadmill may be plugged into a GFCI-equipped outlet, which is incompatible with the treadmill.
4. The key may not be fully inserted into the console.
5. The on/off switch near the power cord may not be in the "on" position.
6. The circuit breaker on the treadmill frame may have tripped and needs resetting.
Check these factors to restore power to the treadmill.
This answer is automatically generated