Power Management Setup - Shuttle MB11 User Manual

Power Management Setup

Power Management Setup
6.
5
Power Management
This item determines the options of the power management function. Max Saving
puts the system into power saving mode after a brief period of system inactivity; Min
Saving is the same as Max Saving except the time of the system inactivity period is
longer; Disabled disables the power saving feature; User Defined allows you to set
power saving options according to your preference.
PM Control by APM
If this item set to No, system BIOS will be ignored and APM calls the power to
manage the system.
If this item setup to Yes, system BIOS will wait for APM's prompt before it enter any
PM mode e.g. DOZE, STANDBY or SUSPEND.
Video Off Method
This item define the video off features -V/H SYNC + Blank, DPMS, and Blank Only.
The first option, which is the default setting, blanks the screen and turns off vertical
and horizontal scanning; DPMS allows the BIOS to control the video display card if
it supports the DPMS feature; Blank Screen only blanks the screen.
Video Off After
This item define when to activate the video off feature for monitor power manage-
ment. The settings are N/A, Doze, Standby and Suspend.
MODEM Use IRQ
This item determines the IRQ in which the MODEM can use.
The choice: 1, 3, 4, 5, 7, 9, 10, 11, N/A.
- 32 -