Power Management Setup - Shuttle HOT-617 User Manual

Power Management Setup

Power Management
This item determines the options of the power management function. Default value is
Disable. The following pages tell you the options of each item & describe the meanings of
each options.
Disabled Global Power Management will be disabled.
User Define Users can configure their own power management.
Min Saving Predefined timer values are used such that all timers are in their
maximum value.
Max Saving Predefined timer values are used such that all timers minimum
value.
PM Control by APM
If this item set to No, system BIOS will ignore and APM calls when the power is managed
the system.
system BIOS will wait for APM's prompt before it enter any PM mode e.g. DOZE,
STANDBY or SUSPEND .
Video Off Method
Blank ScreenThe system BIOS will only blanks off the screen when disabling
video.
V/H SYN In addition to Blank Screen, BIOS will also turn
+Blank off the V-SYNC & H-SYNC signals from VGA cards to
monitor.
DPMS This function is enabled for only the VGA card supporting
DPM.
If this item setup to Yes,
User's Manual 24