Setting Up The Scanner; Installing The Interface Cable - Motorola Symbol LS3408-ER Product Reference Manual

Setting Up the Scanner

Installing the Interface Cable

Loosen the two screws on the cable clamp at the bottom of the scanner and gently pull the clamp away from
1.
the bottom of the scanner.
Removing the Cable Clamp
Figure 1-2
Open the clamp and plug the interface cable modular connector into the cable interface port on the bottom of
2.
the scanner handle.
Inserting the Interface Cable
Figure 1-3
Gently tug the cable to ensure the connector is properly secured.
3.
Getting Started 1 - 3