10 - 4 Symbol LS3408 Product Reference Guide
Scanner Emulation Host
Scan the bar code below to enable the Scanner Emulation host.
Scanner Emulation Host Parameters
Beep Style
The Scanner Emulation host supports three beep styles.
•
The default is to beep when the connected decoder issues the decode signal to the scanner. This way, the
scanner and the attached decoder beep at the same time.
•
The second option is to beep on the scanner's decode. This results in a double beep sequence from most
decoders, since the scanner beeps, and the decoder beeps (at a different frequency) when it successfully
decodes the output.
•
The third option is to not beep at all since the attached decoder issues the decode beep.
In all cases, if an error condition occurs, the scanner issues error beeps.
Scanner Emulation Host
*Beep On Successful Transmit
Beep At Decode Time
Do Not Beep