Setting Up The Digital Scanner; Installing The Interface Cable - Motorola Symbol DS3407 Reference Manual

Setting Up the Digital Scanner

Installing the Interface Cable

Loosen the two screws on the cable clamp at the bottom of the digital scanner and gently pull the clamp away
1.
from the bottom of the digital scanner.
Loosening Screws on Bottom of Digital Scanner
Figure 1-2
Open the clamp and plug the interface cable modular connector into the cable interface port on the bottom of
2.
the digital scanner handle.
Connecting the Interface Cable
Figure 1-3
Gently tug the cable to ensure the connector is properly secured.
3.
Getting Started 1 - 3