Set Lengths For Interleaved 2 Of 5 - Motorola Symbol LS3408-ER Product Reference Manual

12 - 32 Symbol LS3408 Product Reference Guide
Set Lengths for Interleaved 2 of 5 (continued)
Two Discrete Lengths - Select this option to decode only I 2 of 5 symbols containing either of two selected
lengths. Select the length using the numeric bar codes in
decode only those I 2 of 5 symbols containing either 2 or 14 characters, select I 2 of 5 - Two Discrete Lengths,
then scan 0, 2, 1, and then 4. In case of an error, or to change the selection, scan Cancel on
Length Within Range - Select this option to decode an I 2 of 5 symbol within a specific length range. Select
lengths using the numeric bar codes in
symbols containing between 4 and 12 characters, first scan I 2 of 5 - Length Within Range. Then scan 0, 4, 1,
and 2 (enter a leading zero for single digit numbers). In case of an error, or to change the selection, scan Cancel
on page D-3.
Any Length - Select this option to decode I 2 of 5 symbols containing any number of characters within the scanner
capability.
NOTE Due to the construction of the I 2 of 5 symbology, it is possible for a scan line covering only a portion of the
code to transmit as a complete scan, yielding less data than is encoded in the bar code. To prevent this,
Motorola recommends selecting specific lengths (I 2 of 5 - One Discrete Length, Two Discrete Lengths) for
I 2 of 5 applications.
Appendix D, Numeric Bar
I 2 of 5 - Two Discrete Lengths
Appendix D, Numeric Bar Codes.
I 2 of 5 - Length Within Range
I 2 of 5 - Any Length
Codes. For example, to
page
For example, to decode I 2 of 5
D-3.