Removing The Touch Pad; Prerequisites; Procedure - Alienware 17 R4 Service Manual

All manuals and user guides at all-guides.com

Removing the touch pad

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
For more safety best practices, see the Regulatory Compliance home
page at www.dell.com/regulatory_compliance.

Prerequisites

1 Remove the base
2 Follow the procedure from step 1 to step 4 in
3 Remove the wireless
4 Remove the solid-state
5 Remove the rear-I/O
6 Remove the computer
7 Remove the battery.

Procedure

1 Open the latch and disconnect the touch-pad cable from the system board.
2 Open the latches and disconnect the touch-pad cable and the touch-pad
buttons cable from the touch pad.
3 Remove the five screws (M2x3) that secure the touch-pad bracket to the
palm-rest assembly.
82
computer. After working inside your
cover.
card.
drive.
cover.
base.
After working inside your
"Removing the hard
computer.
drive".