All manuals and user guides at all-guides.com
Removing the power-adapter port
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
For more safety best practices, see the Regulatory Compliance home
page at www.dell.com/regulatory_compliance.
Prerequisites
1
Remove the
base
2
Follow the procedure from step 1 to step 4 in
3
Remove the
wireless
4
Remove the
solid-state
5
Remove the
memory
6
Remove the
rear-I/O
7
Remove the
computer
8
Follow the procedure from step 1 to step 21 in
Procedure
1
Remove the screw (M2x3) that secures the power-adapter port bracket to
the palm-rest assembly.
2
Lift the power-adapter port bracket off the power-adapter port.
3
Lift the power-adapter port off the palm-rest assembly.
4
Peel the tape that secures the power-adapter-port cable to the palm-rest
assembly.
70
computer. After working inside your
cover.
card.
drive.
modules.
cover.
base.
After working inside your
"Removing the hard
"Removing the system
computer.
drive".
board".