Table of Contents
Advertisement
All manuals and user guides at all-guides.com
Replacing the coin-cell battery
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
For more safety best practices, see the Regulatory Compliance home
page at www.dell.com/regulatory_compliance.
Procedure
1
Adhere the coin-cell battery to the palm-rest assembly.
2
Adhere the tape that secures the coin-cell battery to the palm-rest assembly.
3
Route the coin-cell battery cable through the routing guide on the palm-rest
assembly.
4
Adhere the tape that secures the coin-cell battery cable to the system board.
5
Connect the coin-cell battery cable to the system board.
Post-requisites
1
Replace the
computer
2
Replace the
rear-I/O
3
Replace the
solid-state
4
Replace the
wireless
5
Follow the procedure from step 4 to step 7 in
6
Replace the
base
46
computer. After working inside your
base.
cover.
drive.
card.
cover.
After working inside your
"Replacing the hard
computer.
drive".
Advertisement
Table of Contents
