True Fitness CS400-9 Owner's Manual page 30

CHAPTER 2: ASSEMBLY INSTRUCTIONS
BIKE ASSEMBLY STEPS (continued):
Power Supply Installation Step B (remove access plastic):
Power Supply Installation Step C (remove wire tie):
Input Plug
Remove wire-tie
Truefitness.com / 800.426.6570 / 636.272.7100
• Remove the Access Plastic
fasteners (quantity 3) with a
Phillips head screwdriver
(not provided)
• Remove the Access Plastic
•
Remove the wire-tie shown
in the provided image (left)
• This will release the Power
Supply Input Plug
• Use caution not to drop the
loose wire-tie into the
machine after it has been
removed
26