Table of Contents
Advertisement
CHAPTER 2: ASSEMBLY INSTRUCTIONS
BIKE ASSEMBLY STEPS (continued):
Step 1 & 2 Front and Rear Stabilizer Bars:
CAUTION:
•
It is recommended that at least 2 people are used to assemble the bike
•
To protect the floor from damage, rest the bike frame on a large piece of cardboard packaging
1a
•
Rotate the frame forward on the Front
Stabilizer bracket (metal)
•
At least one person should hold the frame,
while another person completes the
remaining Rear Stabilizer installation steps
2a
•
Rotate the frame backwards on the Rear
Stabilizer
•
At least one person should hold the frame,
while another person completes the remaining
Front Stabilizer installation steps
Truefitness.com / 800.426.6570 / 636.272.7100
1b
•
For each screw, install through split washer then
flat washer
•
Insert Rear Stabilizer into the metal bracket
•
Install each screw through the bottom of the metal
bracket, then through the Rear Stabilizer
•
Tighten using the provided hex wrench
2b
•
For each screw, install through split washer then
flat washer
•
Insert Front Stabilizer into the metal bracket
•
Install each screw through the bottom of the metal
bracket, then through the Front Stabilizer
•
Tighten using the provided hex wrench
10
Advertisement
Table of Contents
