True Fitness CS400-9 Owner's Manual page 17

CHAPTER 2: ASSEMBLY INSTRUCTIONS
BIKE ASSEMBLY STEPS (continued):
Step #4 Front Mast Cable Routing:
*Complete the power supply installation on page 23 prior to completing this step if this unit will be paired with a
touchscreen or 15" TFT console.
Pull-tie provided with the front mast (see image, above)
NOTE: This connector is only used for the touchscreen
console installation.
If installing a touchscreen console, please refer to "Power
Supply Installation, Step A" before proceeding with
"Front Mast Cable Routing, Step # 4".
Truefitness.com / 800.426.6570 / 636.272.7100 13