CHAPTER 2: ASSEMBLY INSTRUCTIONS
BIKE ASSEMBLY STEPS (continued):
Step #5 Front Mast:
Step #6 Mast Boot:
•
•
•
•
•
Truefitness.com / 800.426.6570 / 636.272.7100
For each screw, install through split washer then flat
washer
Insert the Front Mast onto exposed bike frame U-
bracket; pay special attention not to pinch any wires
between the Front Mast and the frame
Verify that the Front Mast is in the correct
orientation (reference the provided image, left)
Secure the Front Mast to the bike frame by
tightening all 6 screws with the provided hex wrench
Verify that the Front Mast is secured tightly to the
bike frame; tighten screws if necessary
•
Pull down the Mast Boot
•
Attach the Mast Boot to the plastic shrouds by
tightening both screw with a Phillips head
screwdriver (not provided)
14