True Fitness CS400-9 Owner's Manual page 19

CHAPTER 2: ASSEMBLY INSTRUCTIONS
BIKE ASSEMBLY STEPS (continued):
Step #7 Handlebar Cable Routing:
•
While at least one person holds the
Handlebar, another person should
direct the Handlebar Cables through the
Front Mast
Step #8 Handlebar:
• At least one person should continue to hold the
Handlebar while another person completes the
remaining handlebar installation steps
Truefitness.com / 800.426.6570 / 636.272.7100
• Insert the Handlebar U-bracket onto the
Front Mast; pay special attention that the
Handlebar Cables are pulled all the way
through the Front Mast, so that no cables
become pinched between the Handlebar
U-bracket and Front Mast
•
For each screw, install through split
washer then flat washer
• Secure the Handlebar to the Front Mast
by tightening all 3 screws with the
provided hex wrench
•
Verify that the Handlebar is secured
tightly to the Front Mast; tighten screws if
necessary
15