4.2.10 Stay-R
(1) Remove the right side cover. (See section 4.2.3)
(2) Remove the Scanner.
(3) Remove the soft-absorber ① and cover side(R-Inner) ② .
(4) Remove the seven screws (silver,No:42920406) ③ and remove the Stay-R ④ .
Note! When assemble the scanner, assemble the soft-absorber correct position
and close the scanner.(Frame and soft-absorber break may occur)
②
①
④
4.2.11 Plate-Board-R Assy/Guide-Cable Power Low
(1) Remove the right side cover. (See section 4.2.3)
(2) Remove the stay-R Assy. (See section 4.2.10)
(3) Remove the rear cover. (See section 4.2.7)
(4) Remove the plate shield and take CU PCB and PU PCB out. (See section 4.2.9)
(5) Remove the eight screws (silver, No:42920406) ① ,remove the two screws
(black,No:42932708) ② and remove the Plate-Board-R-Assy ③ .
(6) Remove the Guide-Cable Power Low ④ .
③
×7
4. Component replacement
②
④
③
①
×8
②
79 /