Data] To Back Up/Restore Configuration Logs - i-PRO WV-U85402-V2L User Manual

4 Advanced settings
4.13 [Maintenance] to maintain the machine
4.13.5

[Data] to back up/restore configuration logs

Click [Data] in the Maintenance page. Refer to the following how to display and operate the
Advanced menu.
→4.2.1 How to display
→4.2.2 How to operate
Here, you can back up/restore your computer's setup data, scene files, and save your log.
Backup
[Setup data]
You can back up the computer's settings to your computer by clicking [Execute].
[Scene file]
By clicking on [Execute], you can back up the scene file settings for your computer.
[Logs]
You can back up your computer's logs by clicking [Execute].
[Important]
・If you install the camera, the camera may be turned by mistake. When registering
a preset after installation, it is recommended to perform position refresh.
[Note:]
・Please refer to the following for the network settings. Refer to the WEB Guide for
the formatting method.
→4.11.1 Networking [Network]
・When you select Alarm or Mail Notification function, if the SD Memory Card is
not installed after restarting, you can notify the set [Destination E-mail address]
or [Destination of notification].
→4.11.2.1 Set mail sending
→4.9.10 [Notification] to set alarm notification
[Important]
・It takes a long time to create a backup file when backing up configuration data
and logs.
・If the backup operation takes more than 10 minutes, a communication timeout
424