Alarm] To Set The Alarm; Alarm] To Set Alarm Operation - i-PRO WV-U85402-V2L User Manual

4 Advanced settings
4.9 [Alarm] to set the alarm
MJPEG : Affiche l'image de caméra vidéo en format JPEG à mouvement (vidéo).
Intervalle de rafraîchissement: 1s/ Intervalle de rafraîchissement: 3s/ Intervalle de rafraîchissement:
5s/ Intervalle de rafraîchissement: 10s/ Intervalle de rafraîchissement: 30s/ Intervalle de
rafraîchissement: 60s: Affiche le format JPEG (image fixe) de caméra vidéo à l'intervalle sélectionné.
[Taille de l'image d'importation(4 écrans)]
Sélectionner une taille de l'image d'importation pour obturation 4 écrans dans l'affichage initial.
640x360/320x180
4.9

[Alarm] to set the alarm

The alarm page is used to set the alarm operation using the external I/O terminal of the camera,
the alarm image, the area to detect the alarm, and the alarm notification. The Alarm page consists
of the [Alarm], [VMD area], [SCD area], [Audio detection], and [Notification] tabs.
4.9.1

[Alarm] to set alarm operation

Click [Alarm] on the Alarm page. Refer to the following how to display and operate the Advanced
menu.
→4.2.1 How to display
→4.2.2 How to operate
This is used to set the operation when an alarm is detected. For the alarm image and output
terminal settings, refer to the following.
→4.9.4 [Alarm] to set alarm linkage operation
→4.9.2 [Alarm] for setting the output terminal
Alarm
[Terminal 1]
Set the operation of terminal 1.
[Off]:Not used
[Alarm input (TRM1)]:The alarm input is received. When Alarm is selected, a pull-down menu
([Close], [Open], [Close(Continue)], [Open(Continue)]) is displayed.
[Note:]
・The items that can be set differ depending on the function of the model.
・Refer to the catalog specifications for the functions installed in each model.
309