Electrical Parts - Pioneer CYK009GMFILCAD-10 Manual

1.3 Electrical Parts (Antistatic gloves must be worn.)
Note: Remove the panel (refer to 1.1) before disassembling electronic control box subassembly.
Procedure
1)
Open left cover of panel (see
Remove 2 screws and remove the
2)
cover of electronic control box
Fig. 8 ).
(see
3)
Remove 2 screws of air switch cover
Fig. 11 )(for some models).
(see
Note: This section is for reference only. Actual unit appearance may vary.
Illustration
Fig. 10 ).
Indoor Unit Disassembly

Figure 10
Figure 11
7
