1.8
Stepper Motor
Note: Remove the panel (refer to 1.1) before disassembling stepper motor.
Procedure
1)
Open the louver and push the hooks
in the direction shown in the right
side picture (see Fig. 22).
2)
Remove 2 screws fixing the motor
cover, and remove it (see Fig. 23).
3)
Remove 2 screws and remove the
stepper motor (see Fig. 24).
Note: This section is for reference only. Actual unit appearance may vary.
Illustration
Indoor Unit Disassembly
Figure 22
Figure 23
Figure 24
15