Table of Contents
Advertisement
I
I
NSTALLATION
NSTRUCTIONS
Electrical Hookup
Connection and Powering Up of System:
Connect the receiver extension socket to the
system, and power up the machine by inserting
the included power plug into a 115V/60Hz outlet.
A 12 VDC connection is also connected from the
vehicle's battery to supply power to the unit's PCB.
Use the yellow wire next to the AC power cord to
connect to the vehicle battery to facillitate power to
the heat pump system's command control module.
Before switching on, ensure that the electrical
supply and the extension used are capable of
withstanding the power input required by the
system (see technical data and/or nameplate).
e installation process is now complete.
For any troubleshooting steps, please see Page 22.
Simpli ed Wiring Diagram of PYR009AZFRVBKE
support@pdhvac.com | (800)-675-7410 | https://www.pdhvac.com/support/
21
Advertisement
Table of Contents
