iRobot Roomba Combo i5+ Owner's Manual page 18
Robot vacuum
Hide thumbs
Also See for Roomba Combo i5+:
- User manual ,
- Owner's manual (109 pages) ,
- Owner's manual (50 pages)
Advertisement
Cleaning the Mopping Pad
HAND WASHING
Thoroughly wash the pad with warm water.
MACHINE WASHING
Wash using the warm cycle, then air dry. Do not
tumble dry. Do not wash with delicates.
Replacing the Wick Cap
1
Remove pad plate
2
Remove the wick cap by pulling on the side
rubber tab.
3
Replace with a new wick cap, pressing
firmly into place to create a tight seal to
prevent leaking.
4
Reintall pad plate
Roomba
i5+ Owner's Guide
11
®
EN
Advertisement
Need help?
Do you have a question about the Roomba Combo i5+ and is the answer not in the manual?
Questions and answers
how do you attch the mopping attachment to the robot
To attach the mopping attachment to the iRobot Roomba Combo i5+, follow these steps:
1. Remove the existing dust bin from the Roomba.
2. Insert the Combo Bin by sliding it into place until it fits securely.
3. Fill the Combo Bin with water and, optionally, a compatible cleaning solution.
4. Slide the mop pad down the track and press it firmly onto the pad plate to secure it.
5. Ensure the attachment sits flush with the robot using the velcro.
This setup prepares the Roomba for vacuuming and mopping.
This answer is automatically generated