iRobot Roomba Combo i5+ Owner's Manual page 17
Robot vacuum
Hide thumbs
Also See for Roomba Combo i5+:
- User manual ,
- Owner's manual (109 pages) ,
- Owner's manual (50 pages)
Advertisement
Removing Debris from Blower
Cover
Inspect blower cover for any lint or debris build-
up and wipe with a clean dry cloth to remove.
EN
10
For more information, visit global.irobot.com
Replacing the Bag
1
Lift up on the canister lid to open.
2
Pull up on the plastic card to remove the bag
from the canister.
Note:
This will seal the bag so dust and
debris cannot escape.
3
Discard the used bag.
4
Install a new bag, sliding the plastic card into
the guide rails
5
Press down on the lid making sure it is
completely closed.
Note:
To achieve optimal performance with
your robot and automatic dirt disposal, clean
and/or replace your robot's filter as needed.
Advertisement
Need help?
Do you have a question about the Roomba Combo i5+ and is the answer not in the manual?
Questions and answers
how do you attch the mopping attachment to the robot
To attach the mopping attachment to the iRobot Roomba Combo i5+, follow these steps:
1. Remove the existing dust bin from the Roomba.
2. Insert the Combo Bin by sliding it into place until it fits securely.
3. Fill the Combo Bin with water and, optionally, a compatible cleaning solution.
4. Slide the mop pad down the track and press it firmly onto the pad plate to secure it.
5. Ensure the attachment sits flush with the robot using the velcro.
This setup prepares the Roomba for vacuuming and mopping.
This answer is automatically generated