iRobot Roomba Combo i5+ Owner's Manual page 14
Robot vacuum
Hide thumbs
Also See for Roomba Combo i5+:
- User manual ,
- Owner's manual (109 pages) ,
- Owner's manual (50 pages)
Advertisement
Cleaning the Filter
1
Remove the bin. Remove the filter by
grasping both ends and pulling out.
2
Remove debris by tapping the filter against
your trash container.
3
Reinsert filter with ridged grips facing out.
Place bin back in the robot.
Important:
The robot will not run if
the filter is not installed correctly.
Replace the filter every two months.
Cleaning the Full Bin Sensors
1
Remove and empty the bin.
2
Wipe the inner sensors with a clean, dry
cloth.
3
Wipe the bin door with a clean, dry cloth.
Closed Door
Open Door
Washing the Bin
Important:
Do not wash the filter. Remove
the filter before washing the bin.
1
Release the bin, remove the filter, and open
the bin door.
2
Rinse the bin using warm water.
Note:
Bin is not dishwasher safe.
3
Make sure bin is completely dry. Reinsert
filter and place bin back in the robot.
Roomba
i5+ Owner's Guide
®
EN
7
Advertisement
Need help?
Do you have a question about the Roomba Combo i5+ and is the answer not in the manual?
Questions and answers
how do you attch the mopping attachment to the robot
To attach the mopping attachment to the iRobot Roomba Combo i5+, follow these steps:
1. Remove the existing dust bin from the Roomba.
2. Insert the Combo Bin by sliding it into place until it fits securely.
3. Fill the Combo Bin with water and, optionally, a compatible cleaning solution.
4. Slide the mop pad down the track and press it firmly onto the pad plate to secure it.
5. Ensure the attachment sits flush with the robot using the velcro.
This setup prepares the Roomba for vacuuming and mopping.
This answer is automatically generated