iRobot Roomba Combo i5+ Owner's Manual page 15
Robot vacuum
Hide thumbs
Also See for Roomba Combo i5+:
- User manual ,
- Owner's manual (109 pages) ,
- Owner's manual (50 pages)
Advertisement
Cleaning the Edge-Sweeping
Brush
1
Use a small screwdriver to loosen the
screw holding the Edge-Sweeping Brush
EN
in place.
2
Pull to remove the Edge-Sweeping Brush.
Remove any hair or debris, then reinstall
the brush.
8
For more information, visit global.irobot.com
Cleaning the Front Caster Wheel
1
Pull firmly on the front wheel module to
remove it from the robot.
Important:
A front wheel clogged with
hair and debris could result in damage
to your floor. If the wheel is not
spinning freely after you have cleaned
it, please contact Customer Care.
2
Pull firmly on the wheel to remove it from its
housing
Axle
Wheel
Housing
3
Remove any debris from inside the wheel
cavity.
4
Reinstall all parts when finished. Make sure
the wheel clicks back into place.
Advertisement
Need help?
Do you have a question about the Roomba Combo i5+ and is the answer not in the manual?
Questions and answers
how do you attch the mopping attachment to the robot
To attach the mopping attachment to the iRobot Roomba Combo i5+, follow these steps:
1. Remove the existing dust bin from the Roomba.
2. Insert the Combo Bin by sliding it into place until it fits securely.
3. Fill the Combo Bin with water and, optionally, a compatible cleaning solution.
4. Slide the mop pad down the track and press it firmly onto the pad plate to secure it.
5. Ensure the attachment sits flush with the robot using the velcro.
This setup prepares the Roomba for vacuuming and mopping.
This answer is automatically generated