iRobot Roomba Combo i5+ Owner's Manual page 16
Robot vacuum
Hide thumbs
Also See for Roomba Combo i5+:
- User manual ,
- Owner's manual (109 pages) ,
- Owner's manual (50 pages)
Advertisement
Cleaning the Multi-Surface Brushes
1
Pinch the brush frame release tab, lift the tab,
and remove any obstructions.
2
Remove the brushes from the robot. Remove
the brush caps from the ends of the brushes.
Remove any hair or debris that has collected
beneath the caps. Reinstall the brush caps.
3
Remove any hair or debris from the square
and hexagonal pegs on the opposite side of
the brushes.
4
Remove the bin from the robot and clear any
debris from the vacuum path.
5
Reinstall the brushes in the robot. Match
the shape of the brush pegs with the shape
of the brush icons in the cleaning head
module
Cleaning the Visual Docking
Target Sensors, IR Window and
Charging Contacts
1
Wipe sensors and charging contacts with
a clean dry cloth. Alternatively, you can
use a pad of melamine foam to remove
built-up debris on the robot and Clean
Base charging contacts.
2
Inspect the visual docking target, IR
window and charging contacts to make
sure that they are clear of debris. Wipe
with a clean, dry cloth.
Important:
Do not spray cleaning solution
or water onto the sensors or sensor
openings.
Roomba
i5+ Owner's Guide
®
EN
9
Advertisement
Need help?
Do you have a question about the Roomba Combo i5+ and is the answer not in the manual?
Questions and answers
how do you attch the mopping attachment to the robot
To attach the mopping attachment to the iRobot Roomba Combo i5+, follow these steps:
1. Remove the existing dust bin from the Roomba.
2. Insert the Combo Bin by sliding it into place until it fits securely.
3. Fill the Combo Bin with water and, optionally, a compatible cleaning solution.
4. Slide the mop pad down the track and press it firmly onto the pad plate to secure it.
5. Ensure the attachment sits flush with the robot using the velcro.
This setup prepares the Roomba for vacuuming and mopping.
This answer is automatically generated