iRobot Roomba Combo i5+ Owner's Manual page 12
Robot vacuum
Hide thumbs
Also See for Roomba Combo i5+:
- User manual ,
- Owner's manual (109 pages) ,
- Owner's manual (50 pages)
Advertisement
Roomba Combo™ Bin
Filter
Dust Bin
Water Tank
Mopping Pad
Pad
Attachments
Important:
You must register your product in the iRobot Home App
and complete a mapping run before using your Combo Bin. See the
Activate your Combo Bin card for instructions.
1
INSTALL THE MOPPING PAD
Dust Bin Door
Slide the pad down over the
Tank Cap
track. Press the pad to the plate
to attach.
Pad Plate
Pad Track
Wick Cap
Wick Cap
3
SWAP THE BINS
Remove the Dust Bin from
the robot, and install the
Combo Bin.
Important: Do not
flip the robot over
with the Combo
Bin installed
2
FILL THE BIN
Fill the Combo Bin with water.
You may also use a compatible
cleaning solution. Compatible
solutions are listed at this
answers.irobot.com/s/roomba-
combo-cleanser
Note:
The product starts
wicking as soon as water
is put into the tank.
Roomba
i5+ Owner's Guide
®
EN
5
Advertisement
Need help?
Do you have a question about the Roomba Combo i5+ and is the answer not in the manual?
Questions and answers
how do you attch the mopping attachment to the robot
To attach the mopping attachment to the iRobot Roomba Combo i5+, follow these steps:
1. Remove the existing dust bin from the Roomba.
2. Insert the Combo Bin by sliding it into place until it fits securely.
3. Fill the Combo Bin with water and, optionally, a compatible cleaning solution.
4. Slide the mop pad down the track and press it firmly onto the pad plate to secure it.
5. Ensure the attachment sits flush with the robot using the velcro.
This setup prepares the Roomba for vacuuming and mopping.
This answer is automatically generated