Setting Utc; Setting The Time; Setting The Date - Uwatec LUNA 2.0 AI User Manual

2.2.1.1 Setting UTC

The UTC setting will change the displayed time compared to Greenwich 0-Meridian. This feature is practical
when traveling through different time zones. By long-pressing the right button you may edit the hours with the
pushbuttons in a range of +14h to -13h. By long-pressing the right button you confirm the hours, and the minutes
will be highlighted. The minutes can be edited in 15-minute increments.

2.2.1.2 Setting the time

By entering the Set Time submenu, the time setting will be activated. You may change the hours and the minutes
using the pushbuttons.
F NOTE: The seconds cannot be edited, they always start counting from 0.

2.2.1.3 Setting the date

By entering the Set Date submenu, the first two digits will be highlighted. You may edit them using the pushbuttons.
Change the selection to the next two digits by long-pressing the right button. Finally, set the year and confirm the
settings. In 24h time format the first digits in the date are days, in AM/PM time format the month is first.
24
LUNA 2.0 AI USER MANUAL