Ascent Speed Alarm; Manually Starting An Apnea Dive (St. Apnea); Warning Settings - Uwatec LUNA 2.0 AI User Manual

Table of Contents

Advertisement

2.1.3.8 Ascent speed alarm

In this menu you may enable or disable the the ascent speed alarm by choosing AUDIBLE or OFF. By selecting
AUDIBLE you can select the interval from 0.1 to 5.0 meters/second (1 to 15 feet/sec) in 0.1m/sec (1ft/sec)
increments.

2.1.3.9 Manually starting an Apnea dive (ST. APNEA)

Apnea exercise mode can be manually started from the Dive -> St. Apnea menu. The session starts with a surface
interval.
Display information and diving with this mode is described in chapter Diving in APNEA mode.
F
NOTE: Manually starting an apnea dive will automatically change the dive mode to Apnea.
2 .1 .4

Warning settings

There are four warnings which can be enabled and edited directly in the LUNA 2.0 AI. The rest of the warnings can
only be enabled / disabled via SCUBAPRO LogTRAK. To learn more about the warnings see chapter Alarms and
warnings during diving.
21
LUNA 2.0 AI USER MANUAL

Advertisement

Table of Contents
loading

This manual is also suitable for:

Luna 2.0

Table of Contents