Table of Contents
Advertisement
indication displayed on your LUNA 2.0 AI's screen.
• Once the message "SAVE PAIRING" appears on your LUNA 2.0 AI's display, confirm it by a long-press of the
right button.
4 .5 Bluetooth USB dongle
PCs and laptops with Bluetooth driver version lower than 4.0 require a generic Bluetooth dongle 4.0 or higher in
combination with Windows
With older operating systems a BlueGiga type dongle is required.
5 .
INTERFACES FOR THE LUNA 2.0 AI AND AN INTRODUCTION TO LOGTRAK
5 .1 Establishing Bluetooth communication
The LUNA 2.0 AI can be connected via Bluetooth to a desktop computer, laptop or handheld device for downloading
dive data, configuring dive computer settings, writing owner information, or uploading firmware updates.
From the main menu, toggle down to Bluetooth using the right button. Long-press the right button to initialize the
connection.
At this point the LUNA 2.0 AI is ready for Bluetooth communication. Bluetooth is active only when the below screen
is displayed.
To establish Bluetooth communication with another device, set the device you want your LUNA 2.0 AI to
communicate with (e.g. an iOS
require entering a pin code to ensure secure communication. This pin code is randomly generated by your LUNA
2.0 AI and is shown on its screen.
72
operating system 8 or higher.
®
or Android™ handheld device) to "scanning" mode. The first time you do this will
®
LUNA 2.0 AI USER MANUAL
Advertisement
Table of Contents
