Table of Contents
Advertisement
Switching on and off
Operating the machine
A light touch of the finger on the sensor
buttons is all that is required to operate
this machine.
Switching on the refrigerator
The Freezer Zone and the Fridge Zone
can be switched on at the same time
using the two On/Off buttons.
To enable the temperature to get suffi-
ciently cold inside the refrigerator, al-
low it to run for approx. 3–5 hours (de-
pending on the ambient temperature)
before placing food in it.
Do not place food in the Freezer Zone
until it has reached the required cold-
ness (at least 0°F/-18°C).
Touch one of the two On/Off but-
tons until the temperature display
lights up.
The refrigerator will be switched on and
the interior lighting will come on in the
Fridge Zone.
24
The temperature display for the Fridge
Zone indicates the temperature in the
Fridge Zone.
- If the temperature in the Freezer Zone
is above 32°F (0°C), bars will flash in
the temperature display for the
Freezer Zone.
- As soon as the temperature drops
below 32°F (0°C), the temperature in
the Freezer Zone will flash on the dis-
play.
- The display LEDs will flash until
the set temperature has been
reached in the Freezer Zone.
The refrigerator will gradually reach the
pre-set temperatures:
- Temperature in the Fridge
Zone = 37°F (3°C)
- Temperature in the Freezer Zone =
0°F (-18°C)
Advertisement
Table of Contents
