Starting Up The Appliance After Cleaning; Replacing The Carbon Filters - Miele KFN 13923 DE edt/cs Operating And Installation Instructions

Fridge-freezer combination
Hide thumbs Also See for KFN 13923 DE edt/cs:
Table of Contents

Advertisement

Cleaning and care
Starting up the appliance after
cleaning
 Replace all shelves and accessories
in the appliance.
 Reconnect to the power supply and
switch the appliance back on.
 Switch on the automatic SuperFreeze
function for a while so that the freezer
section can cool down quickly.
 Switch on the automatic SuperCool
function for a while so that the refrig-
erator section can cool down quickly.
 Put the food back in the appliance
and close the door.
 Push the freezer drawers with the
frozen food back into the freezer sec-
tion and close the door.
 Switch off the automatic SuperFreeze
function as soon as the temperature
in the freezer section is a constant
0°F (-18°C) or colder.
54

Replacing the carbon filters

Replace the carbon filters in the holder
around every 6 months.
Replacement KKF-RF carbon filters
can be obtained from Miele Customer
Service, from your dealer, or from
Miele's website.
Tip: The carbon filter holder is dish-
washer safe.
 Pull the carbon filter holder upward to
remove it from the adjustable shelf.
When in position, the carbon filters
must not touch the back wall of the
refrigeration appliance, as the mois-
ture could cause them to stick to it.
Insert the new carbon filters deep
enough in the holder to ensure that
they do not protrude over the edge
of the holder.

Advertisement

Table of Contents
loading

Table of Contents