Table of Contents
Advertisement
Before using for the first time
Remove all packaging material and
protective film.
Clean the inside of the appliance and
the accessories (see "Cleaning and
care").
Switching the refrigeration ap-
pliance on
Open the appliance door.
Press the On/Off button in the control
panel for approx. 3 seconds until the
temperature display lights up.
A buzzer sounds.
The refrigeration appliance will start to
cool and the interior lighting will come
on when the appliance door is opened.
The refrigeration appliance will gradually
reach the pre-set temperatures.
After switching on the refrigeration
appliance, it can take up to
8 minutes until the compressor
starts.
To enable the temperature to get suf-
ficiently cold inside the refrigeration
appliance, allow the appliance to run
for a few hours before placing food
in it. Do not place food in the refri-
geration appliance until it has
reached the preset temperature.
Switching on and off
Switching off the refrigeration appli-
ance
Press the On/Off button in the control
panel for approx. 3 seconds until the
temperature display goes out.
A buzzer sounds.
The cooling and interior lighting are
switched off.
Please note: the refrigeration appli-
ance is not disconnected from the
power supply when it is switched off.
Switching off for longer periods of
time
If, during a long absence, the refri-
geration appliance is switched off
but not cleaned and the door is left
shut, there is a danger of mould
building up inside the appliance.
It is essential to clean the refrigera-
tion appliance before a long period
of absence.
If the refrigeration appliance is not go-
ing to be used for a longer period of
time, observe the following:
Switch the refrigeration appliance off.
Switch off at the wall and disconnect
the plug from the socket, or discon-
nect the fuse.
Clean the refrigeration appliance and
leave the door ajar to air the appli-
ance and avoid odours building up in-
side.
27
Advertisement
Table of Contents
