Switching On And Off; Before Using For The First Time; Switching The Refrigeration Appliance On - Miele KFN 4374 ED ws Operating Instructions Manual

Before using for the first time

 Remove all packaging material and
protective film.
 Clean the inside of the appliance and
the accessories (see "Cleaning and
care").
Allow the refrigeration appliance to
stand for approx. 1 hour before con-
necting it to the power supply.
This will prevent potential functional
problems with the refrigeration appli-
ance.
Connecting the refrigeration appli-
ance
 Connect the refrigeration appliance to
the electricity supply as described in
"Electrical connection".

Switching on and off

Switching the refrigeration ap-
pliance on
After you have connected the refrigera-
tion appliance to the electrical supply,
an alarm tone sounds and the temper-
ature alarm display in the freezer sec-
tion flashes.
 Press the button for setting the tem-
perature  in the refrigerator section
or the freezer section.
The alarm tone will stop.
The refrigeration appliance will start
cooling and gradually reach the pre-set
temperatures.
To enable the temperature to get suf-
ficiently cold inside the refrigeration
appliance, allow the appliance to run
for a few hours before placing food
in it. Do not place food in the refri-
geration appliance until it has
reached the preset temperature.
Do not place food in the freezer zone
until it has reached the preset tem-
perature (min. -18 °C).
Switching off the refrigeration appli-
ance
 Disconnect the power supply.
The cooling and interior lighting are
switched off.
35