Table of Contents
Advertisement
Selecting additional settings
Changing the size of the ice
cubes
The size of the ice cubes depends on
the quantity of water being taken in.
You are able to set this quantity accord-
ing to your wishes. To make larger ice
cubes, increase the amount of water
being taken in by the ice cube maker.
The amount of water is set to
(medium) at the factory.
Touch the SuperFrost button to the
right-hand side of the display for ap-
prox. 5 seconds.
MENU lights up on the display and
flashes on the display.
Settings mode has now been activated.
Touch one of the sensor buttons for
setting the temperature ( and ) re-
peatedly until appears on the dis-
play.
Touch the SuperFrost button to
confirm your selection.
The most recently selected setting will
appear on the display.
The water volume set can then be al-
tered within the range of to by
touching one of the sensor buttons
for setting the temperature ( and
).
Only alter the water volume setting
by one level to start with and then
observe the result over the next few
days. If the water volume is set too
high, the ice cube tray in the ice
cube maker can overflow.
Touch the SuperFrost button to
confirm your selection.
34
MENU lights up on the display and
flashes.
Touch the On/Off button to exit
Settings mode.
Advertisement
Table of Contents
