Table of Contents
Advertisement
Inserting the upper soft-close
mechanism
Remove the cover from the
panel , turn it 180°, and reinsert it
on the other side.
Hook the spacer into the latch (A) on
the handle side.
Hook the soft-close mechanism into
the latch (B) on the machine side.
Push both parts out so that they are
firmly engaged.
Changing the door hinges
Use the screw to secure the
spacer and soft-close mechanism in
place.
Attach the panel onto the soft-
close mechanism bracket .
Slide the cover on from the side so
that the openings for the pin are
aligned.
Pull the soft-close mechanism
bracket toward the hinge plate and
insert the pin from above so that
the square sits in the depression.
Snap the cover completely in
place.
Make sure that the cover fits properly
so that the door can be closed without
hindrance and the pin is secured.
Remove the safety device .
93
Advertisement
Table of Contents
