Table of Contents
Advertisement
Frequently asked questions
The interior lighting is not working.
Problem
The interior lighting is
not working.
64
Possible cause and solution
The refrigeration appliance has not been turned on.
Turn the appliance on.
Sabbath mode is switched on: the temperature dis-
play is dark and is shown in the display.
You can switch off Sabbath mode at any time (see
"Selecting additional settings – Switching Sabbath
mode on/off").
To avoid overheating, the interior lighting switches it-
self off automatically after approximately 15 minutes
if the appliance door is left open. If this is not the
cause, there is a fault.
Risk of electric shock due to exposed, live
electrical components.
When removing the lighting cover, there is a risk of
coming into contact with live electrical compo-
nents.
Do not remove the lighting cover. The LED lighting
may only be repaired or replaced by Technical Ser-
vice.
Risk of injury from LED lighting.
This lighting corresponds to risk group RG 2. If the
cover is defective, there is a risk of eye injury.
If the lighting cover is defective, do not look from a
close range directly into the lighting with optical in-
struments (e.g., magnifying glass or similar).
Contact Technical Service.
Advertisement
Table of Contents
