NOTE:
For instructions on how to find your computer's IMEI (International Mobile Station Equipment Identity) number,
see the knowledge base article
Next steps
1. Install the
base
cover.
2. Install the
microSD
card.
3. Install the
SIM
card.
4. Follow the procedure in
Solid-state drive
Removing the M.2 2280 solid-state drive
Prerequisites
1. Follow the procedure in
2. Enter
service
mode.
3. Remove the
SIM
card.
4. Remove the
microSD
5. Remove the
base
cover.
About this task
NOTE:
You can refer the below procedure to remove the M.2 2280 solid-state drive removal from SLOT 1 and SLOT 2.
The following images indicate the location of the M.2 2280 solid-state drive and provide a visual representation of the removal
procedure.
Steps
1. Remove the single screw (M2x4) that secures the M.2 2280 solid-state drive to the system board.
2. Slide and remove the M.2 2280 solid-state drive from the solid-state drive slot on the system board.
30
Removing and installing components
000143678
After working inside your
Before working inside your
card.
at www.dell.com/support.
computer.
computer.