Steps
1. Align and place the speakers on the palm-rest assembly.
2. Route the speaker cable through the routing guide on palm-rest assembly.
Next steps
1. Install the
assembly inner frame
2. Install the battery.
3. Install the
base
cover.
4. Install the
microSD
card.
5. Install the
SIM
card.
6. Follow the procedure in
System board
Removing the system board
Prerequisites
1. Follow the procedure in
2. Remove the
SIM
card.
3. Remove the
microSD
4. Remove the
base
cover.
5. Remove the
solid-state
NOTE:
To remove the thermal pad on mylar which is available only in systems with Intel Pyramid Glacier SSD
configuration follow the below steps.
56
Removing and installing components
After working inside your
Before working inside your
card.
drive.
computer.
computer.