Front Glass Installation - Dimplex Optimyst OLF46-AM Manual

Installation

Front Glass Installation

!
NOTE: Two people are required for installation of the
front glass.
!
NOTE: Turn on the power switch before installing the
front glass. The power switch is located in the upper
right corner inside the rebox.
1. Ensure there are no debris or nger prints on the inner
side of the front glass before you begin.
2. Attach the provided suction cups to the outer side of
the front glass. Ensure the suction cups are securely
attached.
3. Using the suction cups to assist, lift the glass and
place it directly in front of the media bed at a slight
angle.
4. Lift the front glass slightly to hook the front glass onto
the posts on each side of the replace. (Figure 18)
!
NOTE: When installed correctly, the front glass should
not obstruct the hidden touch controls.
5. Remove the suction cups and clean any ngerprints or
debris off the glass with a nonabrasive glass cleaner.
!
NOTE: Do not dispose of the suction cups! Keep
them in a secure location, as they may be needed for
maintenance and service on this replace.
18
Figure 18
Front Glass Post
(One on each side)
www.dimplex.com