Front Glass Installation - Dimplex PRISM BLF3451-AU Owner's Manual

Fireplace Installation
6. Refer to Front Glass
Installation section, for final
installation procedures.

Front Glass Installation

1. Evenly distribute supplied
glass rock on the front tray of
the fireplace (Figure 9).
2. Carefully mount front glass
assembly so that the front
glass hooks (4) hang on the
front glass mounts on the
fireplace (4) (Figure 9).
3. Use the supplied two (2)
Phillips sheet metal screws to
fasten the glass assembly tabs
to the fireplace (Figure 11).
4. Ensure the fireplace's
3-Position Switch is switched
to the Off position ("O").
5. If unit is not hard-wired, plug
fireplace into a 10 Amp, 230-
240 Volt outlet.(refer to NOTE
1).
Figure 8
Wall
surface
Mounting hole
Mounting hole
13